This testing machine is mainly used to measure the flexural strength of various different specifications of gypsum boards, and at the same time, it can measure the maximum bending deformation of the gypsum board when it breaks. The product complies with the requirements of GB/T 9775 “Test Methods for Paper-faced Gypsum Board”. The product can also test the flexural strength of other brittle boards.
Basic technical parameters:
1. Maximum load: 6kN
2. Measurement range: 0 – 2kN, 0 – 6kN
3. Relative error of indication: ±1%
4. Maximum piston stroke: 140mm
5. Motor power: 0.12kW
6. Net distance between upper and lower pressing rollers: 40mm
7. Range of support center for two lower pressing rollers: 100 – 600mm
8. Effective length of pressing rollers: 620mm
9. Power supply: 50Hz three-phase five-wire 380V
10. Dimensions (length × width × height): 910mm × 715mm × 975mm
11. Net weight: approximately 178kg
12. Oil specification: N40
You must be logged in to post a review.
Reviews
There are no reviews yet.